Fitment Drawing in Millimeters
Image below for web viewing only. Download PDF to print.
Fitment Drawing in Inches
Image below for web viewing only. Download PDF to print.
In order to make sure that the cool bottle will fit your bike, you need to measure a few things first:
- Check that your elbow pad mounting bolts (distance measured from the centre of the bolt) are within the range shown on the drawings. If they are narrower or wider, reach out to us support@eitech.io. You may need to use the included spacers to get the exact bolt spacing on your setup.
- Check that there are no obstructions between the elbow pads. If you have a riser or monopost bottle mount, or extensions that come between the arms, the standard bottle mounting may not fit. If you have questions or would like advice, reach out to support@eitech.io
- As an alternative, the templates can be printed out at 100% scale. The metric measurement template is designed to be printed on A4 sized paper (download PDF), while the imperial measurement is designed to be printed on US Letter paper (download PDF).
- Measure the distance between your forearms. It should not exceed 10 cm (100 mm, 4″), otherwise your forearms will not easily make contact with the cooling pads.
If you are uncertain about any of these steps, our customer service team can help you with sizing: support@eitech.io
Before placing your order, it is required that you perform these measurements, or you may not be eligible for a refund. You will be asked to confirm this at the checkout step.
